Description

Wireless Constant Voltage Dimming LED Driver

RLED30CV4

30W Four Channel Driver

• In-line RF 30W four channel, constant voltage dimming LED driver
• A compact single channel 75W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED fittings
• Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units
• Designed for use with 3 or 4 channel constant voltage four channel LED tape with common +ve and individual -ve connections
• Maximum wattage off 120W when used as 4 channel or 90w with 3 channel for 12V d.c. fittings or 240w (60w per channel) for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application).
• Programmed using either an RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory.
• Can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system

 

RLED30SLAVE

30W Four Channel Slave

A slave unit for use with RLED30CV4 modules for installations with long runs of 3 or 4 colour LED tape.

• Designed to work with RLED30CV4 modules where the length of tape exceeds the capacity of the RLED30CV4
• The RLED30Slave is fed the output signal from the RLED30CV4 and allows a further length of tape to be controlled from the same base RLED30CV4 unit
• More cost effective than having multiple RLED30CV4 units but importantly allows colour cycling to remain in sync where multiple RLED30CV4 units may drift due to slight differences in the internal clocks.
• Controlled from any Rako Rakom device, e.g. RCM wall plates or Bridge interface units.

  We are an approved distributor for Rako products so if you cannot see what you are looking for or you need any help selecting the right Rako products or anything else for your project then why not give us a call or send us an email and one of our team will be happy to help you out. CALL FOR TRADE DISCOUNTS